RG59/66 BNC Twist On Connector

8ch 240fps Digital Video Surveillance System

REAL-TIME 240/240fps Live/Record, INTERNET... Price: $997.45

1/3'' Sony CCD 19-LED 480-line Vandal-Proof Varifocal Infrared Dome Camera

Vandal-Proof Varifocal Infrared Dome Camera... Price: $148.45

Sony 540 Long-Range Infrared IR CCTV Camera 8-40mm Lens

View over 100ft away! Price: $259.95

18 Camera 12 Volt DC Power Supply Box

Allow up to 18 cameras to be continously... Price: $69.95

4ch Active UTP Video Balun Receiver, 4BNC to 1x RJ45

4ch video signal transmission up to 1200... Price: $79.95

	Strip cable as shown. Be careful not to nick center conductor or outer braid.

	Twist outer braid in a clockwise direction so that at least 1/32" of cable dielectric is bared, and braid is left flat. (stray or loose braid can cause shorts.)

	Gently insert center conductor into back end of connector, "feeling" it into the guide hole. (if center conductor is not properly in place, about 1/8" of center conductor will show at the back end. Reinsert until cable dielectric reaches position shown in illustration.)

	Push the cable firmly in place (as far as possible). Then screw the connector onto the cable in a clockwise direction until it stops. Assembly is complete.

Sorry, no items found